Resources

Material Guides

Practical, vendor-neutral guidance on choosing the right material for each of our six assortments — written by our technical team.

Adhesive Tape

How to Choose the Right Industrial Adhesive Tape

A practical guide to selecting industrial adhesive tape — single vs double-sided, backing materials, adhesive chemistry and matching the tape to the job.

Read guide

Release Liner

Release Liner Selection Guide: Films, Release Force & Antistatic

Understand release liners — silicone vs fluorine coatings, single vs double-sided, release force and antistatic options — and how to specify the right one.

Read guide

Thermal Solutions

Thermal Interface Materials Explained: Pads, Gels, Grease & Liquid Metal

Compare thermal interface materials — pads, gels, grease, phase-change and liquid metal — by conductivity, gap, reworkability and how to pick the right one.

Read guide

Foam

EPDM vs NBR vs SCR Foam: Choosing a Sealing & Gasketing Foam

EPDM, NBR and SCR closed-cell foams compared for sealing and gasketing — weather and chemical resistance, density, compression and how to choose.

Read guide

Industrial Liquid Adhesive

Industrial Liquid Adhesives: PUR, Epoxy, UV, Silicone & MMA

A guide to industrial liquid adhesives — PUR hot-melt, one/two-part epoxy, UV-curing, silicone/MS and MMA acrylate — by strength, cure and substrate.

Read guide

Tools & Accessories

Tape Dispensers & Application Tools for Consistent Results

Why the right dispenser and application tools matter — hand dispensers, applicators, primers and removers — for faster, more consistent taping on the line.

Read guide

Adhesive TapeCase study

Masking Tape for Precision Electroplating — A Qualification Case Study

A plating line kept losing parts to a masking tape that leaked in the bath. Here is what the process actually demanded, why the first tape failed, and how a silicone-adhesive polyimide film tape passed DOE and went into production.

Read guide

Adhesive TapeHow-to

How to Make a Splice That Holds: A Step-by-Step Guide

A step-by-step flying splice that holds at speed — roll preparation, tape placement and speed matching — plus manual splices, tape choice and troubleshooting.

Read guide

Need help choosing a material?

Tell us your application and our technical team will recommend — and where needed, customise — the right product.

WhatsApp us Email us